ZPDT RELEASE 1.8.2 DRIVER 51.14

$0.00

ZPDT RELEASE 1.8.2 DRIVER 51.14

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.8.2 DRIVER 51.14

$0.00

OVERVIEW

zPDT Fixpack Software Update, release date July 25, 2018
This Fixpack release of GA-8 (51.14) includes the following updates:

  • Permit oprmsg inputs and outputs to be put to a separate but configurable output file
    • Please see details discussed on the Forum. The Redbook will be updated for the next major release.
  • Enhancement to make the zPDT LPAR name configurable
    • Please see details discussed on the Forum. The Redbook will be updated for the next major release.
  • OSA issue with VSWITCH running on zVM6.4
  • Correct userid name length for z1090instcheck test
  • Includes miscellaneous fixes

In addition, the base GA-8 base driver (51.10) provides the following enhancements which are continued in 51.10:

  • ZAAPs are not allowed with ZARCH_ONLY
    · zOS stall due to constrained transactions
    · Fixed Incorrect Length Indication Suppression issue with awstape
    · Add warning message to gen2_init –remove to check server settings
    · Fixed LDK installation issue on SLES 12 SP2 and on OpenSUSE Leap 42.3
    · Added check if userid is greater that 8 characters
    · Fixed problem with outbound Arp Resolution which eventually lead to “Out of Xmit Buffer
    Condition”
    · Ubuntu install checking if patches are applied

This product is only available to Authorized ITC Customers. IBM Personnel and their Subcontractors are to use Resource Link.

System Configuration and Prerequisites. The supported levels of Linux must be at least the 64-bit version of Red Hat Enterprise Linux (RHEL) 7.0 or greater, the 64-bit version of openSUSE 13.1 or greater, the 64-bit version of SLES 12 SP1 or greater, and Ubuntu 16.04 or greater. Earlier versions are not supported.

 

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

  • Unzip the downloaded release file
  • Review the Readme file (.html & .pdf) for full information and instructions
  • FTP or otherwise transfer the install file (z1090-1-8.51.14.x86_64 in the /linux directory) to your zPDT system in the /tmp directory
  • Switch to root (UID 0) mode: su –
  • Change to the /tmp directory: cd /tmp
  • Make the program file executable: chmod 775 z1090-1-8.51.14.x86_64
  • Execute the z1090 installer program: ./z1090-1-8.51.14.x86_64
  • You will have to scroll through the license agreement then accept it. The installation should then complete.

 

For CDROM or .iso distributions:

  • Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it.
  • See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
  • Copy the z1090 file to your /tmp directory:

cp /run/media/ibmsys1/zPDT 51.14/linux/z1090* /tmp (1 See note below regarding path to the CD)

  • Switch to root (UID 0) mode: su –
  • Change to the /tmp directory: cd /tmp
  • Make the program file executable: chmod 775 z1090-1-8.51.14.x86_64
  • Execute the z1090 installer program:   ./z1090-1-8.51.14.x86_64
  • You will have to scroll through the license agreement then accept it. The installation should then complete.

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 51.14.

 

Review the External Release Letter carefully; there are significant changes.

 

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 5 of the zPDT Guide and Reference Redbook, (SG248205) version 3.